Before the new husk pellet mill run in, we should prepare raw materials, waste engine oil, fine sand, etc. First we need to take a certain amount of raw materials (between 2-5 kg), add an appropriate amount of fine sand and waste engine oil to reconcile, then start the husk pellet mill, put in the raw materials, and constantly adjust the gap between the pressure roller and the grinding disc. Until the normal discharge, it should be noted here that when the gap is adjusted, the gap must not be too small, otherwise it will damage the pressure roller and the grinding disc; if it cannot be discharged normally, the small feed particles need to be removed. The machine bolts are loosened slightly.
husk pellet mill
With the sales contract, the order tracking clerk checks the models and quantities of each machine and spare parts.
Quality Test Before Delivery
Upon completion of the manufacturing of equipment, tthe quality inspector strictly checks quality of every machine with the checklist.
Check Items When Packing
Before packaging and shipment, the order tracking clerk checks the packaged items again with the packing list to avoid loss of items.
Sign the contract
Adopting international common standards for accurate design of product packaging, prevent product damage rate and the effective use of transport tools, which ensure the perfect delivery of products.
Get the minimum offer free of charge, please fill in the following information to tell us (confidential information, not open to the public)