Feed pellet machine equipment is simple and easy to understand, but there are still some things to pay attention to, which can help us work better, improve production efficiency, and improve product quality. What are the matters needing attention in the production of feed pellet machine, the following RICHI will introduce to you.
1. Before using the feed pellet machine, the entire feed pellet machine should be thoroughly cleaned and inspected, the belt tension should be adjusted, and then connected to the power supply and turned in the direction of the mark.
2. Adjust the "tightening screw" of the pressure wheel of the feed pellet machine to 0.1-0.3 mm between the pressure wheel and the template.
3. The feed pellet machine can be tested before working. After the normal work, the feed can be started after normal discharge.
Matters needing attention in the production of feed pellet machine
4. The length of the pellet feed produced by the feed pellet machine can be adjusted to the upper and lower positions of the recording cutter. This way you can get the length you want.
5. For the safe production of the feed pellet machine, after the machine is shut down, after removing the box cover, the power must be turned off and the machine switch must be turned off before touching the platen of the pressure roller by hand and other tools.
6. When the feed pellet machine is pressed to 20,000 kg of dismantling rollers for cleaning and maintenance of copper lubricating oil, comprehensive maintenance and refueling are performed every six months.
7. Please use a grounding device for the motor of feed pellets. The customer must install an overload protection device.
The above is the article for you: Matters needing attention in the production of feed pellet machine. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: email@example.com