Biomass pellet machine is the preferred equipment to protect energy resources and create new energy sources. It can make corn stalks, rice husks, forages, branches, tree stalks, bark, cotton stalks and other raw materials into fuel or feed. In our life Each corner shows its unique features. When people are tired and have a rest, let alone granule machines. When the biomass pellet machine is working, there will be fatigue.. What do you need to do at this time? That is how to maintain it. The following introduces some biomass pellet machine maintenance. What measures should be paid attention to during maintenance.
Biomass pellet machine maintenance should pay attention to what measures?
1.Periodic inspection of the parts, carried out once a month, check whether the moving parts such as the worm gear, worm, lubricating block, bearings, etc. are flexible and worn, and if defects are found, they should be repaired in time and should not be used barely;
2.The biomass pellet machine should be used in a dry and clean room.It should not be used in places where the atmosphere contains acids and other corrosive gases.
3.After the biomass pellet machine is used or stopped, the rotating drum should be taken out for cleaning and brushing the remaining powder in the bucket, and then installed properly to prepare for the next use;
4. When the roller moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw on the back of the bearing frame to a proper position, adjust the gap so that the bearing does not sound, and turn the pulley by hand. It is appropriate to tighten it properly. Too tight or too loose can damage the machine. ;
5. If the biomass pellet machine is not used for a long time, the whole body of the machine must be wiped and cleaned. The smooth surface of the machine should be coated with anti-rust oil and covered with a cloth awning.
With the sales contract, the order tracking clerk checks the models and quantities of each machine and spare parts.
Quality Test Before Delivery
Upon completion of the manufacturing of equipment, tthe quality inspector strictly checks quality of every machine with the checklist.
Check Items When Packing
Before packaging and shipment, the order tracking clerk checks the packaged items again with the packing list to avoid loss of items.
Sign the contract
Adopting international common standards for accurate design of product packaging, prevent product damage rate and the effective use of transport tools, which ensure the perfect delivery of products.
Get the minimum offer free of charge, please fill in the following information to tell us (confidential information, not open to the public)