Looking for a wood grinder for sale Philippines buyers can use for woody coconut residues? The XPJ850×500 drum chipper offers a 132 kW main motor and a reference capacity of 5–7 m³/h.

A coconut processor in the Davao Region of the Philippines needed a more practical way to handle the woody residues generated by its agricultural operations. The company processed coconuts for coconut water, virgin coconut oil, and desiccated coconut, while its wider material stream included coconut shells, fibrous husks, and woody residues from mature coconut palms. Storing and disposing of these materials required space, labor, and additional handling.
Rather than investing in a complete biomass processing plant immediately, the company chose a single RICHI XPJ850×500 drum chipper as the first stage of its biomass recovery project. The objective was to reduce suitable woody materials into manageable chips for storage, transportation, and potential use as biomass fuel or as feedstock for further processing.
For businesses searching for a wood grinder for sale Philippines, this project highlights an important equipment-selection consideration. A machine should be matched to the physical characteristics of the material being processed, not simply to the overall volume of agricultural waste generated.
Name:
drum chipper
Country:
the Philippines
Date:
2026
Capacity:
Flexible
Model:
XPJ850×500
Power:
132 kW
Flying knives:
10
Fixed knives:
3
The customer had spent more than two decades in agricultural processing and wanted to develop an additional business around the recovery of usable biomass. A single-machine investment allowed the company to evaluate this opportunity without committing immediately to a complete chipping, grinding, drying, and pelletizing line.
RICHI recommended the XPJ850×500 drum chipper for the suitable woody fraction of the customer's material stream. Its large feed opening, hydraulic feeding arrangement, and multiple cutting knives were suited to processing appropriately prepared wood and woody palm residues.
The project had three practical objectives:
The selected machine was intended to serve as an independent processing unit. Additional crushing, screening, or pelletizing equipment would only be considered if the customer's target products and market requirements justified the investment.
The XPJ850×500 is an industrial drum chipper rather than a conventional wood hammer mill. It uses cutting knives to reduce suitable woody feedstock into chips.
| Technical Parameter | Specification |
|---|---|
| Model | XPJ850×500 |
| Feed inlet size | 850 × 500 mm |
| Maximum feed material diameter | 500 mm, subject to the approved feed configuration |
| Feed motor power | 4 + 3 kW |
| Main motor power | 132 kW |
| Hydraulic pump motor | 1.5 kW |
| Discharge belt motor | 2.2 kW |
| Flying knives | 10 |
| Fixed knives | 3 |
| Total listed motor ratings | 142.7 kW |
| Reference processing capacity | 5–7 m³/h on suitable material |
The 132 kW main motor supplies the power required by the cutting system, while the feed mechanism regulates material movement into the cutting chamber. The hydraulic system supports feeding control, and the discharge belt transfers the resulting chips away from the machine.
The reference throughput of 5–7 m³/h should not be treated as a guaranteed output for every material. Actual capacity depends on wood species, moisture, material dimensions, feeding consistency, knife condition, and the required chip characteristics.
Coconut processing generates several distinct material streams, and these should not automatically be treated as interchangeable feedstocks.
| Material | Processing Consideration |
|---|---|
| Coconut palm trunks and suitable woody sections | Potential feedstock for the drum chipper after confirming dimensions and material condition. |
| Coconut timber and woody offcuts | Suitable candidates for sample testing and chip-size evaluation. |
| Hard coconut shells | Require separate suitability testing; a dedicated shell crusher may be more appropriate. |
| Fibrous coconut husks | May require a dedicated shredder or fiber-processing machine to prevent feeding and cutting problems. |
| Mixed agricultural residues | Should be sorted by material type before equipment selection. |
Hard coconut shells have different mechanical properties from ordinary wood, while long coconut fibers can behave differently from rigid woody material during feeding and cutting. Feeding these materials indiscriminately into a drum chipper could increase knife wear, reduce throughput, or cause operating problems.
For this project, the technically appropriate approach is to assign the XPJ850×500 to suitable woody residues and evaluate shells and husks separately before including them in its operating scope.
The machine provides a first size-reduction stage. It does not, by itself, turn every type of coconut waste into finished biomass pellets or a standardized commercial fuel.
The recommended operating sequence for the woody fraction is straightforward.
Material sorting. Separate suitable woody residues from hard shells, long fibers, soil, stones, and other contaminants.
Feed preparation. Inspect the material dimensions and prepare pieces that comply with the machine's approved feed limits.
Chipping. Feed the prepared material consistently into the XPJ850×500 and monitor motor load, feeding behavior, and chip quality.
Discharge and collection. Transfer the chips through the discharge conveyor to a designated collection area.
Product evaluation. Check chip dimensions, moisture, contamination, and bulk handling characteristics against the requirements of the intended buyer or downstream process.
If the final application requires finer particles, a secondary grinder may be needed. If the objective is biomass pellet production, further processing may include additional grinding, moisture adjustment, pelletizing, and cooling, depending on the raw material and the finished-product specification.
Processing woody agricultural residues requires more than a large motor. Material dimensions, cutting geometry, rotor balance, and feeding stability all influence equipment performance.
The XPJ850×500 configuration incorporates several features relevant to this application.
Knife life will depend on the abrasiveness and cleanliness of the feedstock, operating hours, cutting conditions, and maintenance practices. Material contaminated with stones, metal, or soil can shorten the service interval considerably.
For coconut processors, keeping the incoming material clean and separating non-woody residues before chipping are important steps toward stable operation.
Once the woody fraction has been chipped, the resulting material can be assessed for several downstream applications.
| Potential Application | Additional Considerations |
|---|---|
| Industrial biomass boilers | Confirm moisture, ash content, fuel specifications, and combustion compatibility. |
| Biomass pellet production | Additional grinding and pelletizing may be required. |
| Biomass fuel supply | Chip size, moisture, contamination, and delivery consistency must meet buyer requirements. |
| Further wood processing | Particle dimensions and material quality must match the next processing stage. |
Coconut shells and coconut husks can also have commercial value, but their most appropriate applications and equipment routes may differ from those of woody palm residues. Keeping these streams separate can help the processor choose suitable machinery and avoid unnecessary processing costs.
The customer's longer-term objective was to develop a more valuable outlet for its agricultural residues. The commercial result would depend on the usable material yield, electricity consumption, knife replacement costs, labor requirements, transportation expenses, and the availability of qualified biomass buyers.
The XPJ850×500 crusher machine is a substantial industrial machine. Before installation in the Philippines, the customer must verify the electrical supply, equipment layout, and material-handling arrangements.
| Planning Item | Preliminary Requirement |
|---|---|
| Connected motor ratings | 142.7 kW for the listed motors, excluding additional auxiliary equipment. |
| Electrical compatibility | Confirm motor voltage, 60 Hz frequency compatibility, starting method, protection, and control requirements before shipment. |
| Process water | No routine process-water requirement for standard dry chipping; any dust-control system should be assessed separately. |
| Dust management | Provide suitable extraction or collection where dust generation and workplace conditions require it. |
| Installation space | Use the approved general arrangement drawing. Approximately 30–50 m² may be used as an initial allowance for the machine and immediate working area, excluding storage. |
| Operating personnel | Approximately 2–3 workers per shift as a preliminary allowance, depending on loading equipment, automation, and material handling. |
| Foundation and access | Confirm foundation loads, anchoring, lifting access, and clearance for knife maintenance. |
These space and staffing figures are planning estimates, not verified measurements from the customer's installation. Final requirements depend on the actual machine dimensions, conveyor arrangement, loading method, and maintenance access.
The site should also have adequate space for raw material staging and chip collection. If a loader or forklift is used, its operating route should be separated from personnel access and maintenance areas.
The machine was prepared for export from RICHI's production facilities in China and shipped through Qingdao Port to the Philippines. The supplied logistics plan used a 40-foot container, with the equipment arranged in transportable sections suitable for heavy machinery shipment.
For a project in the Davao Region, the delivery plan needs to account for more than ocean freight. Before dispatch, the buyer and supplier should confirm:
Because the XPJ850×500 has a substantial main motor and a heavy cutting assembly, confirming unloading and installation arrangements in advance helps reduce the risk of delays after arrival.
A drum wood chipper should be selected according to the material it will process and the product required at the discharge point. For this reason, material assessment is an important part of purchasing an industrial wood grinding machine.
For a coconut processing operation, the main technical checks include:
RICHI can assist with equipment selection, layout coordination, operating guidance, and spare-parts planning. The final machine configuration should be confirmed against the actual material samples and the customer's intended application.
The XPJ850×500 project illustrates how a coconut processor can begin developing a biomass operation with a single machine rather than immediately investing in a complete processing line.
For this application, the key is to use the drum chipper for suitable woody residues and establish separate processing routes for hard coconut shells and fibrous husks where necessary. This approach gives the customer a more realistic basis for evaluating chip quality, operating costs, and potential biomass markets.
Businesses searching for a wood grinder for sale Philippines can use should consider the complete material-handling process, not just the machine's motor power or nominal throughput. RICHI Machinery can help evaluate the feedstock, select suitable equipment, and plan the next processing stage according to the intended product and production requirements.
Having the right mix of reliable, high-quality pellet machine and pelletizing systems and expert support is essential to your success. Watch how our end-to-end feed pellet plant solutions have helped our customers optimize their performance.
Our customized and future-proofed turnkey pellet plant solutions is designed with you at the core. From vision to reality and beyond, our team stays connected with yours. Giving you peace-of-mind with an expert at your side.
At RICHI, we go beyond project completion. With RICHI Servicee, we’re your dedicated partners in success. Count on us for expert guidance, minimal downtime, and optimized productivity. Choose RICHI for unmatched service and support.
Meet global product demands and quality standards with industry-leading pellet plant design, engineering, equipment, and construction services for pellet processors.

Your Partner Beyond Project Completion
2000+ cases
RICHI is the leading designer, manufacturer and builder of pellet plants in the world, completing over 2000 projects in 140 countries across 6 continents.
Read More
Increase plant productivity, profitability, and safety by integrating high quality equipment into your pellet production line. Over the years, RICHI has become China's top pellet equipment manufacturer. At the same time, RICHI has established valuable partnerships with the world's leading component and raw material manufacturers to bring you the best there is in technology, automation, and efficiency in pelleting plant machinery.
For nearly 30 years, RICHI has been providing best-in-class pellet plant equipment and services to clients across a variety of industries, sizes, and needs. We pride ourselves on the knowledge and skill that each team member possesses – from our technical sales team to our process design engineers. You can count on RICHI Machinery to take your operation to the next level of innovation, quality, and success.
Need help with your pellet manufacturing plant project? Contact us today.
ANIMAL FEED
BIOMASS
WOOD
ORGANIC FERTILIZER
AQUA FEED
CAT LITTER
MUNICIPAL WASTE RECYCLING
SPECIAL PELLET PRODUCTION
RICHI Machinery continues to deliver world class pellet mill equipment, pellet plant engineering and project solutions that add value to our customers in the animal feed, wood waste, agriculture waste, organic fertilizer, cat litter and special pellet products industries. Throughout the years, we RICHI Machinery have built strong brand, becoming industry-leading pellet machine manufacturer. We value integrity, promise quality, and prioritize your success.
Learn MoreWith our expert team, we precisely implement your process engineering requirements in pellet mill and pelletizing plant systems. No matter which industry you’re in – we understand your needs and deliver solutions that meet the highest standards.
At RICHI, quality comes first. Our pellet making machine and related pellet line equipment undergo rigorous quality controls to ensure they meet the highest standards. Rely on products that are durable, safe, and efficient.
With decades of experience in pellet machine and pellet production line production, we have earned a reputation as a trusted partner in various industries. Our expertise allows us to cover a wide range of applications.
Not only do we offer premium pelleting equipment, but we are also experts at designing, building, installing, and maintaining facilities from the ground up. Our expertise is within pellt plant process design, discovering the most efficient, productive, and profitable way to handle your materials in an end-to-end cycle.
○ RICHI MACHINERY
Keeping in touch with us is an effective way to solve all your problems. If you have any needs or questions, please leave your contact information, then RICHI technical consultants will send design, quotation, videos to your mailbox. You can also contact us directly via WhatsApp: +86 13838389622
Copyright©2015-2026 by HENAN RICHI MACHINERY CO., LTD. All rights reserved.