Wood crushing residue dryer in Cameroon for drying sawdust, wood shavings and selected crushed timber residues before biomass briquette or pellet production.

The wood crushing residue dryer in Cameroon was planned for a timber-residue processor looking to turn wet wood-processing by-products into a more consistent feedstock for biomass fuel production.
Located within Cameroon's wood-processing supply chain, the business collected sawdust, planer shavings and fine crushed wood residues from sawmilling and woodworking operations. The materials were available, but their moisture levels and particle characteristics varied, making it difficult to maintain a stable preparation routine before densification.
Instead of replacing the existing crushing and briquetting equipment, the customer planned to add one φ1.2 × 12 m rotary drum dryer. The machine would serve a specific purpose: reducing excess moisture in prepared wood residues before they entered the next processing stage. This single-machine investment would allow the operator to retain its existing equipment while improving the way incoming timber waste was handled, stored and prepared for biomass briquette production.
Name:
Wood Residues Dryer
Country:
Cameroon
Date:
2026
Capacity:
Flexible
Model:
φ1.2 × 12 m
Drum Speed:
3–12 rpm
Raw Materials:
Sawdust, crushed wood residues
Outlet Air Temperature:
70–80°C
Cameroon has an established timber-processing industry, with sawmills and other wood-processing businesses generating sawdust, bark, shavings, offcuts and other residues. These materials do not all have the same properties or the same end use, but selected fractions can be recovered for further processing instead of being discarded or left unused.
Research on Cameroon's wood-based industries has documented the potential for converting timber residues into useful energy products. Studies have also examined briquettes made from tropical hardwood sawdust, including materials associated with Iroko and Padouk processing. These examples provide a credible industrial context for a project that prepares suitable wood residues for densified biomass fuel.
The customer in this project scenario was a small-to-medium-sized biomass fuel processor working with local timber businesses. Rather than relying on a single large sawmill, the operation collected suitable residues from several suppliers. This arrangement broadened its raw-material base but also introduced variation in moisture, particle size and material cleanliness.
Some loads consisted mainly of fine sawdust from sawing operations. Others contained planer shavings or small crushed wood particles. Covered storage could protect material from rain, but freshly generated residues and material exposed during loading could still arrive with different moisture levels. For a briquette producer, that variation matters because raw-material condition influences feeding, compression and the handling properties of the finished fuel.
A dedicated wood crushing residue dryer was therefore considered as a process improvement rather than a way to increase the nominal capacity of every machine in the plant. The aim was to prepare a more predictable feedstock for the equipment already in place.
RICHI's proposed configuration for this project was one φ1.2 × 12 m single-cylinder rotary drum sawdust dryer. The selection was intended for a wood-residue operation that needed a dedicated drying stage without moving immediately to a larger, more extensive processing system.
The drum diameter is 1.2 m and its length is 12 m. These dimensions describe the selected configuration, but they do not by themselves establish the hourly drying capacity. Actual performance depends on the quantity of water to be removed, incoming moisture, particle size, material flow, heat supply and required outlet condition.
| Parameter | Project Specification |
|---|---|
| Equipment Type | Rotary drum dryer |
| Model | φ1.2 × 12 m |
| Quantity | 1 unit |
| Drum Diameter | 1.2 m |
| Drum Length | 12 m |
| Drum Configuration | Single-cylinder rotary dryer |
| Reference Drum Speed | 3–12 rpm |
| Reference Inlet Air Temperature | 400–500°C |
| Reference Outlet Air Temperature | 70–80°C |
| Primary Material | Sawdust and selected crushed wood residues |
| Intended Process Position | Raw-material preparation before briquetting or pelletizing |
The temperature figures above are the reference parameters supplied for the dryer series. They should not be interpreted as a requirement to heat the wood itself to 400–500°C. The hot-air inlet temperature and the actual material temperature are different. The operating settings must be established according to the feedstock, moisture load, heat source and required product condition.
Before confirming the final operating arrangement, the engineering review would need to establish the material's initial moisture range, target outlet moisture, expected feed rate and available heat source. Without these details, a guaranteed hourly throughput or final moisture figure would be premature.
The main feedstock would be sawdust from timber sawing, supplemented when appropriate by fine crushed wood residues and planer shavings. These materials are generated at different stages of wood processing, so the preparation requirements are not identical.
Sawdust generally enters the drying process as a fine, relatively uniform material, although its particle size and moisture can vary with the sawmill and the timber being processed. Planer shavings are lighter and more irregular. Small crushed wood particles may include a wider range of sizes and may require screening before drying.
For preliminary planning, the operator could consider a blend dominated by sawdust, with smaller proportions of clean shavings and fine wood particles. An illustrative starting mix might contain 70% sawdust, 20% planer shavings and 10% fine crushed wood residues by dry mass. This is a design assumption for discussing the process, not a verified customer formula. The final proportions would depend on material availability, particle characteristics and the briquette or pellet specification.
The blend should not be treated as interchangeable with all timber waste. Bark, coarse offcuts, contaminated wood and oversized chips may require separate preparation or may be unsuitable for the intended product. Painted, chemically treated or otherwise contaminated wood should not be introduced into a fuel stream unless the material and its intended use have been specifically assessed and approved.
Where the feedstock includes mixed tropical hardwood residues, the operator should also account for differences between timber species. Research on Cameroonian sawmill residues has highlighted the importance of identifying wood species and understanding how raw-material properties affect the resulting fuel.
Crushing and drying solve different problems. A crusher reduces particle size; a dryer removes moisture. If the customer already has suitable crushing equipment, adding another crusher would not necessarily address the main limitation in the production process.
In this case scenario, the existing preparation equipment was able to reduce the residues to a workable size. The difficulty arose later, when batches with different moisture levels were fed into the briquette preparation process. A dedicated dryer would help the operator manage that variable before the material reached the press.
The distinction matters for investment planning. A full production-line replacement would involve more equipment, additional installation work and a wider range of interfaces to coordinate. Adding one rotary dryer allows the customer to focus its budget on the process stage that needs improvement while retaining the usable equipment already installed.
The dryer also creates a more defined point for checking moisture. Instead of relying entirely on storage time or outdoor drying conditions, the operator can monitor the incoming material, establish suitable operating settings and inspect the dried material before it proceeds downstream.
This does not remove the need for raw-material management. Covered storage, consistent feeding, screening and moisture checks remain important. The dryer is one part of the preparation process, and its performance depends on the condition of the material supplied to it.
After drying, the wood residues would be transferred to the next stage of the existing production arrangement. Depending on the final product, this may involve screening, blending, feeding to a briquette press or additional size adjustment before pelletizing.
For briquette production, moisture control helps the operator work toward a more consistent compression process. Material that is too wet may require additional drying after forming or may be difficult to handle. Material that is excessively dry can also behave differently during compaction, depending on the feedstock and binder system.
The correct outlet moisture should therefore be determined through material testing and production trials rather than selected from a generic number. The appropriate condition may differ between fine sawdust, planer shavings and mixed crushed wood residues.
The finished briquettes could be marketed to suitable commercial and institutional users equipped to burn densified biomass fuel. Depending on product specifications and the combustion system, potential users may include selected food-processing operations, workshops and other businesses using compatible biomass-fired heating equipment.
Briquettes should not automatically be described as a direct substitute for every grade of charcoal, coal or firewood. Their practical value depends on heating value, ash content, moisture, mechanical strength, dimensions and compatibility with the customer's combustion equipment.
The drying stage supports product preparation, but it does not determine every aspect of finished-fuel quality. The briquette press, raw-material selection, any binder used, cooling and storage conditions also influence the result.
In a rotary drum dryer, prepared material enters the rotating cylinder and advances through the drum as it is redistributed by the internal lifting arrangement. The movement exposes the particles to the drying medium and helps transfer heat across the material flow.
As the material progresses, moisture evaporates and is carried away with the exhaust gas. The extent of drying depends on residence time, inlet conditions, airflow, feed rate and the properties of the material itself.
Fine sawdust requires particular attention to feeding and dust control. Lightweight particles can be carried by the gas stream more readily than larger wood fragments, so the exhaust and collection arrangement must be designed for the actual particle distribution. A mixture containing shavings or coarser particles may behave differently from a uniform sawdust feed.
The dryer should be integrated with appropriate dust collection and fire-prevention measures. Dry wood particles are combustible, and the system design must consider the heat source, airflow, dust accumulation, inspection access and applicable local safety requirements.
For this project, RICHI's technical preparation would focus on the raw-material characteristics and the intended process connection. That includes reviewing how the material will be fed into the drum, where dried material will discharge, how exhaust will be handled and how the dryer will connect to the existing equipment.
Rotary drying technology is used in a range of biomass-processing applications, but each material needs a suitability assessment. The selected machine should not be assumed to handle every feedstock at the same throughput or under identical operating conditions.
Changing from fine sawdust to larger wood chips, fibrous agricultural residues or another material can alter feeding behavior, residence time and heat demand. The dryer configuration and auxiliary equipment should therefore be reviewed whenever the raw-material range changes significantly.
The value of a single-machine purchase depends partly on how well the new equipment fits the customer's existing process. Before shipment, the technical team would need to review the available installation space, foundation requirements, feeding and discharge interfaces, heat-source arrangement and exhaust route.
Raw-material information would be equally important. The customer should provide representative samples or reliable data covering moisture variation, particle size and the expected proportion of each wood residue. These details help establish the drying duty and reduce the risk of selecting a configuration based only on a nominal feed rate.
RICHI Machinery could prepare equipment drawings, installation dimensions and connection information for the site team. Operating documentation and guidance on start-up, shutdown, routine inspection and lubrication would support the installation and handover process.
Commissioning should then focus on stable feeding and measured moisture reduction. The operator would need to record incoming moisture, outlet moisture, feed rate and operating conditions. Briquette samples could be evaluated after production to check whether the chosen preparation settings suit the intended product.
This engineering approach is more useful than relying on a broad capacity claim without knowing the feedstock. A dryer working with relatively dry sawdust has a different water-removal duty from one processing wet mixed residues, even when the drum dimensions are the same.
The planned shipment route is from Qingdao Port in China to the Port of Douala in Cameroon. Douala is a major port serving the country's import and export activities, including timber-related logistics. A timber-sector operator in Cameroon, for example, describes moving sawn timber through its logistics network to the Autonomous Port of Douala.
Before dispatch, the customer would need to confirm the installation layout, access for maintenance, the required foundation and the interfaces with existing machinery. The heat-source and exhaust arrangements should be reviewed alongside the dust-control provisions so that the equipment can be integrated into the site safely.
Providing the site team with drawings and technical documentation before the machine arrives helps coordinate the installation work. The final shipping details and cargo arrangements would be confirmed against the actual order and freight plan.
For a wood-residue processor, the most useful evaluation is whether the dryer helps prepare a more consistent feedstock for the next stage. The operator should compare incoming and outgoing moisture levels across different batches and record how the material behaves during feeding, discharge and briquette production.
Particular attention should be paid to differences between fine sawdust and mixed residues. A change in the raw-material blend can affect the drying result, so the operator should not assume that one set of settings will work equally well for every delivery.
Finished briquettes should also be checked for dimensions, strength, handling durability and the fuel characteristics required by the target market. Those results, rather than the dryer dimensions alone, will show whether the complete preparation process is meeting the customer's production needs.
No verified customer quotation or commissioning report has been supplied for this project scenario. Any direct testimonial, measured capacity, moisture result or claimed improvement should be added only after confirmation from the actual customer or project records.
The wood crushing residue dryer in Cameroon is designed around a clear process requirement: reducing excess moisture in selected sawdust and crushed wood residues before biomass fuel production. The proposed φ1.2 × 12 m rotary drum dryer would be added as a single machine, allowing the operator to retain its existing crushing and briquetting equipment.
The project is relevant to wood-processing businesses looking to make productive use of sawdust, planer shavings and suitable fine timber residues. It also highlights an important purchasing principle: a dryer should be matched to the material's moisture load, particle characteristics and required outlet condition, rather than selected on drum size alone.
For a business considering a wood crushing residue dryer, wood waste dryer or sawdust rotary dryer, the most useful starting information includes the raw-material types, moisture range, particle-size distribution, required final moisture and expected hourly feed rate. With those details, RICHI Machinery can assess the drying duty and recommend a configuration that fits the actual production process.
The objective is to recover more value from timber-processing residues, prepare the material more consistently and improve the integration between drying and densification. A properly selected rotary dryer can support that objective when its operating conditions and auxiliary systems are designed around the real feedstock.
Having the right mix of reliable, high-quality pellet machine and pelletizing systems and expert support is essential to your success. Watch how our end-to-end feed pellet plant solutions have helped our customers optimize their performance.
Our customized and future-proofed turnkey pellet plant solutions is designed with you at the core. From vision to reality and beyond, our team stays connected with yours. Giving you peace-of-mind with an expert at your side.
At RICHI, we go beyond project completion. With RICHI Servicee, we’re your dedicated partners in success. Count on us for expert guidance, minimal downtime, and optimized productivity. Choose RICHI for unmatched service and support.
Meet global product demands and quality standards with industry-leading pellet plant design, engineering, equipment, and construction services for pellet processors.

Your Partner Beyond Project Completion
2000+ cases
RICHI is the leading designer, manufacturer and builder of pellet plants in the world, completing over 2000 projects in 140 countries across 6 continents.
Read More
Increase plant productivity, profitability, and safety by integrating high quality equipment into your pellet production line. Over the years, RICHI has become China's top pellet equipment manufacturer. At the same time, RICHI has established valuable partnerships with the world's leading component and raw material manufacturers to bring you the best there is in technology, automation, and efficiency in pelleting plant machinery.
For nearly 30 years, RICHI has been providing best-in-class pellet plant equipment and services to clients across a variety of industries, sizes, and needs. We pride ourselves on the knowledge and skill that each team member possesses – from our technical sales team to our process design engineers. You can count on RICHI Machinery to take your operation to the next level of innovation, quality, and success.
Need help with your pellet manufacturing plant project? Contact us today.
ANIMAL FEED
BIOMASS
WOOD
ORGANIC FERTILIZER
AQUA FEED
CAT LITTER
MUNICIPAL WASTE RECYCLING
SPECIAL PELLET PRODUCTION
RICHI Machinery continues to deliver world class pellet mill equipment, pellet plant engineering and project solutions that add value to our customers in the animal feed, wood waste, agriculture waste, organic fertilizer, cat litter and special pellet products industries. Throughout the years, we RICHI Machinery have built strong brand, becoming industry-leading pellet machine manufacturer. We value integrity, promise quality, and prioritize your success.
Learn MoreWith our expert team, we precisely implement your process engineering requirements in pellet mill and pelletizing plant systems. No matter which industry you’re in – we understand your needs and deliver solutions that meet the highest standards.
At RICHI, quality comes first. Our pellet making machine and related pellet line equipment undergo rigorous quality controls to ensure they meet the highest standards. Rely on products that are durable, safe, and efficient.
With decades of experience in pellet machine and pellet production line production, we have earned a reputation as a trusted partner in various industries. Our expertise allows us to cover a wide range of applications.
Not only do we offer premium pelleting equipment, but we are also experts at designing, building, installing, and maintaining facilities from the ground up. Our expertise is within pellt plant process design, discovering the most efficient, productive, and profitable way to handle your materials in an end-to-end cycle.
○ RICHI MACHINERY
Keeping in touch with us is an effective way to solve all your problems. If you have any needs or questions, please leave your contact information, then RICHI technical consultants will send design, quotation, videos to your mailbox. You can also contact us directly via WhatsApp: +86 13838389622
Copyright©2015-2026 by HENAN RICHI MACHINERY CO., LTD. All rights reserved.