A wood based cat litter granule machine in Uruguay presses clean pine and eucalyptus residues into 6 mm pellets at an operating timber workshop.

A wood based cat litter granule machine in Uruguay turns sawdust and planer shavings into nominal 6 mm litter pellets. The customer is a mid-sized supplier of sawn timber and machined wood components. Pelletizing gives the workshop a dedicated outlet for clean pine and eucalyptus residues from wood processing.
One RICHI MZLH420 ring-die wood pellet mill is in service alongside the workshop's existing residue-preparation equipment. It has a 90 kW main motor and a single-machine reference capacity of 1–1.2 t/h. The freight plan used the Port of Montevideo as the destination. RICHI also configures ring-die equipment to make animal bedding and fuel pellets from suitable clean wood residues.
Name:
wood cat litter pellets machine
Country:
Uruguay
Date:
2026
Capacity:
1–1.2 T/H
Model:
MZLH420
Main Motor Power:
90 kW
Raw Materials:
Pine and eucalyptus sawdust, pine shavings
Pellet diameter:
6mm
Uruguay's plantation forestry supplies pine and eucalyptus to sawmills and other wood processors. For this workshop, the split at collection matters. A clean sawdust stream can be staged for pelletizing, while the longer shavings from planing go to size reduction. Separate storage also lets the workshop hold a wetter intake lot while it draws on dry material.
The wood litter pellet press retrofit starts with traceable, untreated solid wood. Clean residues are kept separate from sweepings, painted or treated timber, and dust from glued boards. Sorting at collection preserves a usable wood stream before the material reaches the grinder or mixer.
The design blend for pine and eucalyptus litter pellets is weighed on a dry basis. The table gives a reference batch with one tonne of dry solids. Batching this way keeps each wood fraction at the intended share when moisture differs between the bins.
| Wood Fraction | Dry Share | Dry Weight |
|---|---|---|
| Pine Sawdust | 50% | 500 kg |
| Eucalyptus Sawdust | 30% | 300 kg |
| Pine Planer Shavings | 20% | 200 kg |
| Total | 100% | 1,000 kg |
Using pine planer shavings for cat litter calls for grinding the curled pieces that can bridge in the hopper. A screen opening in the 2–4 mm range is a starting point for that fraction and other oversize wood. Fine sawdust can bypass the grinder once it passes the size check. It can also bypass drying when its moisture is already within the working range.
A starting moisture target for the prepared blend is 10–12% on a wet basis. In the example, bringing the eucalyptus fraction from 35% to 12% moisture takes about 462 kg of incoming sawdust to deliver 341 kg to the blend. The dryer removes about 121 kg of water from this fraction per batch, with 300 kg of dry wood conserved.
| Equipment Detail | Project Specification |
|---|---|
| Model and Quantity | 1 × RICHI MZLH420 |
| Press Configuration | Ring-die press without a conditioner |
| Main Motor | 90 kW |
| Anti-Bridging Feeder Motor | 3 kW |
| Forced Feeder Motor | 1.5 kW |
| Combined Motor Ratings | 94.5 kW for the three listed drives |
| Ring Die Inside Diameter | 420 mm |
| Model Pellet Diameter Range | 4–12 mm with the corresponding die |
| Project Pellet Diameter | 6 mm nominal |
| Single-Press Reference Capacity | 1–1.2 t/h on suitably prepared wood |
The job calls for one pelletizing station in a workshop that already prepares residues. The anti-bridging feeder keeps low-density wood particles moving at the inlet. The forced feeder delivers the blend to the ring die at a steady rate. Moisture is managed in the preparation stage, ahead of the press. The die sets the pellet diameter and the cutter sets its length.
At the upper reference rate, the hot-pellet transfer and cooler need to accept 1.2 t/h. The screen and bagger are sized from the cooled flow and the accumulation allowed in the packing hopper. The wood hammer mill grinder handles the shavings and other oversize fractions, and the dryer is sized for the water it needs to remove from wet material.
At 1,000 kg of dry wood per hour, a 12% moisture blend brings about 1.14 t/h to the press. If the hot pellets leave at 11% moisture and cool to 10%, the flows are about 1.12 t/h hot and 1.11 t/h cooled. With 2% of the cooled weight screened out, the example gives about 1.09 t/h at the bagger, or 6.53 t over six net press hours. This balance assumes dry solids are conserved until screening.
For a wood based cat litter granule machine in Uruguay, the amount ready to pack matters as much as the discharge rate. Before bagging, check the temperature and moisture of the cooled pellets. A cooler-sizing target is within 5 °C of the packing-room air. Weigh the fines in a screened sample and repeat the check after a representative bag-handling cycle.
Wet performance is a separate check. Apply the same liquid dose to equal masses of cooled pellets. Weigh each sample after a fixed contact and drain time to measure liquid uptake, and record how quickly the pellets break down. These observations help distinguish two blends that both produce intact 6 mm pellets at the press.
Two other outlets use similar wood fractions and the same type of ring-die press. Each needs a feedstock and die suited to the end use.
For a workshop considering sawmill residue pelletizing in Uruguay, start with the feed inlet and hot-pellet discharge elevations. These determine which conveyors and transfer points can serve the press. Leave working clearance for lifting the ring die and servicing the rollers.
The three listed motor ratings add up to 94.5 kW. Size the electrical supply for the actual nameplate currents and starting loads. Include preparation, conveying, dust extraction, cooling and packing drives when checking the workshop's available power.
The wood route compresses a dry, fibrous blend into cylinders. Wet paper pulp requires water removal, and a bentonite granule can be formed by agglomerating mineral powder. These routes call for different preparation and finishing equipment. The material's incoming form and whether the litter should disperse on wetting or form a scoopable clump guide equipment selection.
The project freight plan specified Qingdao, China, as the export port and the Port of Montevideo as the Uruguayan arrival port, followed by road delivery to the timber workshop. Packed dimensions and lifting points determine how the press can be unloaded. The vehicle and its access to the workshop entrance are part of that check.
When fines rise in a run, samples from the cooler discharge and the filled bag narrow down the cause. Breakage already visible after cooling warrants a check of wood particle size, moisture and press load. When the cooled sample holds up and the bag sample has more fines, the transfer chutes and packing drops are the next places to look.
Keep the screen sample and the bag sample tied to the same lot. Recording the wood split, inlet moisture and press load alongside those samples makes it easier to separate a change in the wood supply from breakage during handling.
To size a wood based cat litter granule machine in Uruguay, send RICHI Machinery the weekly weight and moisture of each clean wood fraction, the target pellet diameter and the tonnes of bagged litter you need per shift. Include the capacities of your grinder, dryer, cooler and screen. We can match the press and die to your wood supply and check which equipment can prepare the blend and finish the pellets.
Having the right mix of reliable, high-quality pellet machine and pelletizing systems and expert support is essential to your success. Watch how our end-to-end feed pellet plant solutions have helped our customers optimize their performance.
Our customized and future-proofed turnkey pellet plant solutions is designed with you at the core. From vision to reality and beyond, our team stays connected with yours. Giving you peace-of-mind with an expert at your side.
At RICHI, we go beyond project completion. With RICHI Servicee, we’re your dedicated partners in success. Count on us for expert guidance, minimal downtime, and optimized productivity. Choose RICHI for unmatched service and support.
Meet global product demands and quality standards with industry-leading pellet plant design, engineering, equipment, and construction services for pellet processors.

Your Partner Beyond Project Completion
2000+ cases
RICHI is the leading designer, manufacturer and builder of pellet plants in the world, completing over 2000 projects in 140 countries across 6 continents.
Read More
Increase plant productivity, profitability, and safety by integrating high quality equipment into your pellet production line. Over the years, RICHI has become China's top pellet equipment manufacturer. At the same time, RICHI has established valuable partnerships with the world's leading component and raw material manufacturers to bring you the best there is in technology, automation, and efficiency in pelleting plant machinery.
For nearly 30 years, RICHI has been providing best-in-class pellet plant equipment and services to clients across a variety of industries, sizes, and needs. We pride ourselves on the knowledge and skill that each team member possesses – from our technical sales team to our process design engineers. You can count on RICHI Machinery to take your operation to the next level of innovation, quality, and success.
Need help with your pellet manufacturing plant project? Contact us today.
ANIMAL FEED
BIOMASS
WOOD
ORGANIC FERTILIZER
AQUA FEED
CAT LITTER
MUNICIPAL WASTE RECYCLING
SPECIAL PELLET PRODUCTION
RICHI Machinery continues to deliver world class pellet mill equipment, pellet plant engineering and project solutions that add value to our customers in the animal feed, wood waste, agriculture waste, organic fertilizer, cat litter and special pellet products industries. Throughout the years, we RICHI Machinery have built strong brand, becoming industry-leading pellet machine manufacturer. We value integrity, promise quality, and prioritize your success.
Learn MoreWith our expert team, we precisely implement your process engineering requirements in pellet mill and pelletizing plant systems. No matter which industry you’re in – we understand your needs and deliver solutions that meet the highest standards.
At RICHI, quality comes first. Our pellet making machine and related pellet line equipment undergo rigorous quality controls to ensure they meet the highest standards. Rely on products that are durable, safe, and efficient.
With decades of experience in pellet machine and pellet production line production, we have earned a reputation as a trusted partner in various industries. Our expertise allows us to cover a wide range of applications.
Not only do we offer premium pelleting equipment, but we are also experts at designing, building, installing, and maintaining facilities from the ground up. Our expertise is within pellt plant process design, discovering the most efficient, productive, and profitable way to handle your materials in an end-to-end cycle.
○ RICHI MACHINERY
Keeping in touch with us is an effective way to solve all your problems. If you have any needs or questions, please leave your contact information, then RICHI technical consultants will send design, quotation, videos to your mailbox. You can also contact us directly via WhatsApp: +86 13838389622
Copyright©2015-2026 by HENAN RICHI MACHINERY CO., LTD. All rights reserved.