RICHI LOGO

2.0–2.5 T/H Sheep Feed Grinder for Sale in Australia

Sheep Feed Grinder for Sale in Australia. One SFSP66×80 hammer mill with 75 kW power for processing ryegrass, kikuyu grass and wheat straw.

2.0–2.5 T/H Sheep Feed Grinder for Sale in Australia

OVERVIEW

Victoria is one of Australia's major sheep-producing states, where pasture-based farming, supplementary feeding and seasonal forage management all influence feed preparation requirements.

A medium-sized sheep farm in Victoria decided to upgrade its existing feed processing equipment after an ageing hammer mill began limiting the consistency and efficiency of roughage grinding.

The farm needed a dependable sheep feed grinder for sale in Australia that could handle its regular forage materials without requiring a complete replacement of the existing feed system.

RICHI Machinery supplied one SFSP66×80 hammer mill for this equipment replacement project. The customer retained the existing mixer and pellet mill, integrating the new grinder into the established feed preparation process. The objective was to improve the preparation of perennial ryegrass, kikuyu grass and wheat straw before mixing and pelleting, while keeping the investment focused on the grinding section.

  • Name:

    Sheep Feed Hammer Mill

  • Country:

    Australia

  • Date:

    2026

  • Capacity:

    2.0–2.5 T/H

  • Model:

    SFSP66×80

  • Power:

    75 kW

  • Raw Materials:

    Grass, Hay And Straw

  • Final product size:

    3mm

Why The Sheep Farm Replaced Its Existing Hammer Mill

The farm's previous grinding equipment had become inefficient when processing fibrous forage materials. Irregular particle distribution affected the consistency of the ground material entering the mixer, making it more difficult to maintain uniform feed batches. For a sheep farm producing its own supplementary feed, dependable grinding is important because variations in particle size can affect mixing, pellet formation and subsequent feed handling.

Rather than purchasing an entirely new sheep feed production line, the customer chose to replace only the outdated hammer mill. The existing mixer and pellet mill remained in operation. This approach allowed the farm to improve its raw material preparation capacity without unnecessarily replacing functional equipment or changing its entire production arrangement.

SFSP66×80 Sheep Feed Grinder Model And Specifications

RICHI selected the SFSP66×80 animal feed hammer mill for its ability to process chopped grass and straw at a reference capacity of 2.0–2.5 T/H. The machine uses a 660 mm rotor and an 800 mm grinding chamber, providing a suitable working configuration for the farm's fibrous feedstock preparation requirements.

Technical Parameter Specification
Equipment Model SFSP66×80
Equipment Type Hammer Mill
Quantity 1 Unit
Rotor Diameter 660 mm
Grinding Chamber Width 800 mm
Rotating Speed 2,980 rpm
Hammer Linear Speed 103 m/s
Main Motor Power 75 kW
Grass And Straw Capacity 2.0–2.5 T/H
Primary Application Grass, Hay And Straw Grinding

The 2.0–2.5 T/H capacity refers to the specified grass and straw grinding duty. It should not be interpreted as the capacity for every grain, hay or straw condition. Actual output depends on incoming material length, moisture, bulk density, screen opening, hammer condition and the required particle distribution. The 75 kW figure represents the hammer mill's main motor, not the connected load of the entire feed processing system.

Grinding Australian Forage And Crop Residues

The farm primarily processes perennial ryegrass, kikuyu grass and wheat straw. These materials serve different purposes in sheep feeding programmes. Perennial ryegrass and kikuyu grass provide forage ingredients, while wheat straw can contribute structural fibre to supplementary feed formulations. Their physical characteristics also differ, which affects how they should be prepared before entering the hammer mill.

Perennial ryegrass can arrive as dried hay or partially dried forage. Its moisture condition and stem length determine whether additional drying or chopping is necessary. Kikuyu grass can contain a relatively high proportion of leafy material and stems, so the incoming moisture and fibre condition should be checked before grinding. Wheat straw is comparatively dry and fibrous, with longer stems requiring appropriate size reduction before entering the grinding chamber.

For this sheep feed grinding application, a 3–5 mm screen opening is a practical starting point for the required preparation trial. The actual discharged particle-size distribution is not identical to the screen opening and must be confirmed through sampling. Excessively fine grinding should be avoided when the formulation requires physically effective fibre for normal rumen function. The final particle specification should therefore be coordinated with the farm's feed formulation and pellet requirements.

How The Hammer Mill Works With The Existing Feed Equipment

The new SFSP66×80 grass crusher machine operates as the grinding stage within the customer's existing feed processing arrangement. Incoming forage is inspected and prepared according to its physical condition. Long grass and straw are chopped before grinding where necessary, while already-short materials can proceed directly when their dimensions and moisture are suitable.

Inside the grinding chamber, the high-speed rotor drives the hammers against the incoming material. Repeated impact and contact with the screen reduce the forage to the required size. Material that reaches the specified discharge condition passes through the screen, while larger particles remain in the grinding zone for further reduction.

The ground forage is then transferred to the existing mixer, where it is blended with the other formulated feed ingredients. Mixing uniformity depends on batch weighing, ingredient sequence, particle distribution and mixing time. The prepared mash subsequently enters the existing pellet mill for compression into sheep feed pellets. The new hammer mill does not independently produce finished pellets or replace the customer's existing mixing and pelleting equipment.

Eight Important Advantages Of The Equipment Upgrade

The replacement of the old hammer mill addresses several practical requirements in the farm's daily feed preparation operation:

1. Improved Forage Grinding: The SFSP66×80 is configured for processing chopped grass and straw, supporting the farm's regular roughage preparation requirements.

2. Consistent Particle Preparation: Screen selection and operating conditions allow the grinding process to be adjusted according to the intended feed formulation.

3. Better Mixing Conditions: More consistent ground material helps the existing mixer distribute forage and other ingredients more evenly.

4. Compatibility With Existing Equipment: The grinder works with the customer's retained mixer and pellet mill, avoiding an unnecessary full-line replacement.

5. Suitable Continuous Grinding Configuration: The 660 mm rotor and 800 mm grinding chamber provide a substantial working area for the specified forage processing duty.

6. Flexible Raw Material Preparation: The equipment can handle different suitable grass and straw materials when their moisture, incoming dimensions and operating conditions are properly controlled.

7. More Organized Pellet Production: Consistent grinding supports downstream mash preparation and helps reduce variations caused by unevenly prepared ingredients.

8. Focused Equipment Investment: Replacing only the outdated grinding machine allows the farm to retain serviceable equipment and concentrate expenditure on the processing stage requiring improvement.

Shipping And Installation In Victoria, Australia

The equipment was arranged for sea freight to Australia, with the Port of Melbourne serving as the intended receiving port for the Victoria project. The port is Australia's largest container and general cargo port and provides an important freight gateway for businesses throughout Victoria. Inland transportation from the port to the farm is arranged according to the actual delivery address and road transport requirements.

Before installation, the customer needs to prepare a suitable foundation, lifting access, material inlet and discharge connections, and sufficient maintenance clearance. The hammer mill must be positioned so that its feeding and discharge arrangements connect properly with the existing material-handling system. The foundation and supporting structure should be confirmed against the approved equipment drawings.

Australia's Victorian electricity supply operates at 50 Hz, with standard nominal low-voltage levels including 230 V and 400 V. The actual three-phase supply available at the farm must be checked before finalizing the motor and electrical control configuration. For a 75 kW machine, the electrical design should also account for motor starting current, overload protection, cable sizing, earthing and suitable dust-control arrangements.

Customer Feedback On The New Sheep Feed Grinder

After operating the replacement hammer mill, the farm's feedback focused on its forage grinding performance, equipment construction and the support received during installation and operator training.

"The SFSP66×80 grinder has significantly improved our feed processing. It handles our ryegrass and wheat straw very well, with minimal downtime. The machine's build quality is evident, and the RICHI team was very responsive during installation and training. This grinder is a solid investment for our feed preparation needs."

Eight Project And Technical Support Services From RICHI

For customers purchasing individual feed processing machines or upgrading existing facilities, RICHI Machinery provides the following project support services:

1. Free Project Cost Estimate

2. Free Process Flow Design

3. Free 3D Plant Layout Design

4. Free Factory Area Planning

5. Free Civil & Steel Structure Design

6. Free Electrical System Design

7. Free Production Testing & Project Reference Support

8. Free Lifetime Remote Technical & Training Support

Choosing A Sheep Feed Grinder For Sale In Australia

For Australian sheep farms and livestock feed processors, selecting a hammer mill requires more than comparing motor power and advertised throughput. Grass type, straw length, incoming moisture, required particle size, existing mixer capacity and downstream pellet mill performance all influence the final equipment configuration.

The SFSP66×80 offers a suitable grinding solution for this project's specified grass and straw processing duty. Its 75 kW main motor, 660 mm rotor and 800 mm grinding chamber provide the basis for integrating one replacement hammer mill into an existing sheep feed preparation system.

RICHI Machinery supplies hammer mills and supporting equipment for animal feed processing applications. Whether you need a sheep feed grinder, a forage hammer mill, or a replacement machine for an existing feed factory, our technical team can assess your raw materials, target grinding size and required capacity before recommending a suitable model.

Contact RICHI Machinery to discuss your sheep feed grinding requirements in Australia and obtain a machine configuration suited to your existing production facilities.

Helping you Grow your Business

Having the right mix of reliable, high-quality pellet machine and pelletizing systems and expert support is essential to your success. Watch how our end-to-end feed pellet plant solutions have helped our customers optimize their performance.

Our customized and future-proofed turnkey pellet plant solutions is designed with you at the core. From vision to reality and beyond, our team stays connected with yours. Giving you peace-of-mind with an expert at your side.

At RICHI, we go beyond project completion. With RICHI Servicee, we’re your dedicated partners in success. Count on us for expert guidance, minimal downtime, and optimized productivity. Choose RICHI for unmatched service and support.

POSITION IN INDUSTRY

Meet global product demands and quality standards with industry-leading pellet plant design, engineering, equipment, and construction services for pellet processors.

Global Reach, China base

Your Partner Beyond Project Completion

2000+ cases

RICHI is the leading designer, manufacturer and builder of pellet plants in the world, completing over 2000 projects in 140 countries across 6 continents.

Read More

The Right Combination


Increase plant productivity, profitability, and safety by integrating high quality equipment into your pellet production line. Over the years, RICHI has become China's top pellet equipment manufacturer. At the same time, RICHI has established valuable partnerships with the world's leading component and raw material manufacturers to bring you the best there is in technology, automation, and efficiency in pelleting plant machinery.

Industries We Serve

For nearly 30 years, RICHI has been providing best-in-class pellet plant equipment and services to clients across a variety of industries, sizes, and needs. We pride ourselves on the knowledge and skill that each team member possesses – from our technical sales team to our process design engineers. You can count on RICHI Machinery to take your operation to the next level of innovation, quality, and success.

Need help with your pellet manufacturing plant project? Contact us today.

 

ANIMAL FEED

BIOMASS

WOOD

ORGANIC FERTILIZER

AQUA FEED

CAT LITTER

MUNICIPAL WASTE RECYCLING

SPECIAL PELLET PRODUCTION

RICHI MACHINERY

RICHI Machinery continues to deliver world class pellet mill equipment, pellet plant engineering and project solutions that add value to our customers in the animal feed, wood waste, agriculture waste, organic fertilizer, cat litter and special pellet products industries. Throughout the years, we RICHI Machinery have built strong brand, becoming industry-leading pellet machine manufacturer. We value integrity, promise quality, and prioritize your success.

Learn More

Expertise

With our expert team, we precisely implement your process engineering requirements in pellet mill and pelletizing plant systems. No matter which industry you’re in – we understand your needs and deliver solutions that meet the highest standards.

Quality

At RICHI, quality comes first. Our pellet making machine and related pellet line equipment undergo rigorous quality controls to ensure they meet the highest standards. Rely on products that are durable, safe, and efficient.

Experience

With decades of experience in pellet machine and pellet production line production, we have earned a reputation as a trusted partner in various industries. Our expertise allows us to cover a wide range of applications.

service

Not only do we offer premium pelleting equipment, but we are also experts at designing, building, installing, and maintaining facilities from the ground up. Our expertise is within pellt plant process design, discovering the most efficient, productive, and profitable way to handle your materials in an end-to-end cycle.

○ RICHI MACHINERY

CONTACT US

Keeping in touch with us is an effective way to solve all your problems. If you have any needs or questions, please leave your contact information, then RICHI technical consultants will send design, quotation, videos to your mailbox. You can also contact us directly via WhatsApp: +86 13838389622

Application:

* We will store the information you have provided us. We will only use this information for the purpose of helping to answer your inquiries. We will not disclose your information to third parties.

Copyright©2015-2026 by HENAN RICHI MACHINERY CO., LTD. All rights reserved.