Two gear-driven ring die pellet mills upgraded an existing poultry feed mill in Lleida, Spain, supporting broiler and layer feed production.

A poultry feed manufacturer in Lleida, Catalonia, undertook an upgrade of its broiler and layer feed pelleting section while keeping the rest of its operating plant in service. The facility already had grain receiving and storage, hammer mills, batch mixers, cooling equipment, and bulk product handling. Its main bottleneck was the group of older belt-driven pellet mills, which had become increasingly difficult to maintain and keep available during scheduled production runs.
Rather than replace the complete feed manufacturing system, the company selected two SZLH508 ring die pellet mills from RICHI Machinery. The new machines were installed in parallel and connected to the existing process. This project was designed around a practical requirement: renew the equipment responsible for pellet formation while retaining upstream and downstream machinery that remained suitable for the plant's production needs.
Name:
Poultry Pellet Machine
Country:
Spain
Date:
2026
Capacity:
30 T/H
Model:
2 units of SZLH508
Main Motor Power:
160 kW
Raw Materials:
Wheat, corn, soybean meal, sunflower seed meal
Pellet diameter:
3.0-4.5mm
The mill produces several poultry feed specifications for broiler and layer customers. Its previous pelletizing arrangement relied on four older presses with belt-driven transmissions. As the equipment aged, routine belt inspection, tension adjustment, replacement work, and unplanned maintenance became more demanding. The plant wanted a more compact group of presses with a gear-driven transmission and sufficient output for its regular poultry feed schedule.
The project therefore focused on the pelleting stage rather than a complete turnkey poultry feed production line. The existing hammer mills continued to prepare wheat and maize. The twin-shaft paddle mixing section continued to blend the ground cereals, protein meals, oils, minerals, and other formula components. The existing cooling and bulk handling equipment also remained part of the process, subject to capacity checks and adjustments for the new pellet discharge rate.
Replacing four older pellet mills with two SZLH508 units reduced the number of individual presses in the production area. It also allowed the plant to operate two larger machines in parallel, instead of coordinating maintenance and product changeovers across four separate presses. For a poultry pellet making machine for feed mill operation, this type of phased upgrade is useful when the grinding and mixing sections are still serviceable and the main investment need is concentrated at the pelletizing stage.
RICHI selected the SZLH508 model with a 160 kW main motor for each machine. The 508 mm ring die provides the working surface for compressing conditioned mash into pellets. The mill ordered interchangeable dies for its broiler starter, grower, finisher, and layer feed specifications.
| Item | Project Configuration |
|---|---|
| Model | SZLH508 |
| Machine type | Gear-driven ring die pellet mill |
| Installed quantity | 2 units |
| Main motor power | 160 kW per unit |
| Ring die inner diameter | 508 mm |
| Selected pellet diameters | 3.0 mm, 3.5 mm, 4.0 mm, and 4.5 mm |
| Design output reference | Up to 15 T/H per unit, depending on formula, die specification, and conditioning conditions |
| Combined design output | Up to 30 T/H for the two-machine section under suitable operating conditions |
The output figure is a design reference rather than a promise that every feed formula will run at the same rate. A smaller die opening, a higher-fibre formula, increased fat inclusion, or a more demanding pellet durability target can reduce throughput. The production team therefore schedules the two presses according to the product being manufactured and the die installed in each machine.
The gear-driven transmission was an important part of the selection. It removes the routine belt-tensioning and belt-replacement tasks associated with the plant's former belt-driven equipment. The ring die and roller assembly still require regular inspection, lubrication, clearance checks, and replacement according to wear, but the main drive arrangement is better suited to a high-duty feed mill schedule.
The customer required four pellet sizes to cover different poultry feeding stages. The selected dies allow the same model of feed pellet machine to produce the required products without installing separate machines for each feed type.
| Feed Type | Selected Die Hole Diameter | Production Purpose |
|---|---|---|
| Broiler starter | 3.0 mm | Starter ration for young broilers |
| Broiler grower | 3.5 mm | Grower ration during the middle stage |
| Broiler finisher | 4.0 mm | Finisher ration before market weight |
| Layer feed | 4.5 mm | Pelleted feed for laying hens |
Die selection is not based on hole diameter alone. The effective compression length, mash characteristics, moisture, steam conditioning, and target pellet durability all influence the final result. During production, operators need to match the die to the feed formula and verify pellet length with the cutter adjustment. A die that is suitable for one broiler phase should not automatically be assumed to deliver the same throughput or durability with a different layer formula.
The plant's poultry feed range is based on cereal ingredients commonly used by Spanish feed manufacturers. Wheat and maize form the main energy base, while soybean meal and sunflower meal contribute protein. Vegetable oil is included to adjust dietary energy. Fishmeal is used in selected starter formulations, while limestone is included in layer feed to meet the calcium requirement of laying hens. Vitamin and mineral additives are incorporated according to the nutritional specification for each production stage.
Before pelleting, whole wheat and maize pass through the plant's existing hammer mills. Grinding consistency matters because large particles can weaken pellet structure and create variation between pellets, while excessive fines can increase dust and affect the flow characteristics of the mash. The grinding screen is selected according to the recipe and the physical requirements of the finished feed rather than using one setting for every product.
After grinding, the cereal meal is transferred to the existing twin-shaft paddle mixers. The plant's mixing section has an 8,000 kg batch capacity and combines the ground grains with protein meals, oil, limestone where required, and the relevant premix. Each batch must be mixed uniformly before it is released to the pelleting section. This is particularly important when the mill changes from broiler feed to layer feed, because the mineral composition and nutrient specification are different.
The feed mill uses separate formulation settings for starter, grower, finisher, and layer products. The exact inclusion rates are set by the customer's nutrition program and raw-material analysis. This allows the plant to account for variations in grain quality, protein meal composition, and seasonal ingredient availability without treating one fixed recipe as suitable for every batch.
The two SZLH508 pellet mills were connected downstream of the existing grinding and mixing sections. Prepared mash is delivered to the press feeding system, metered into the conditioner, and exposed to steam and heat before entering the ring die chamber. Conditioning helps soften the mash and prepare it for compression. The required steam rate and conditioner settings depend on the moisture and composition of each feed formula, so the operating team adjusts them by product rather than relying on one fixed setting.
Selecting a poultry feed pellet making machine for feed mill operation also requires checking the mixer discharge, steam supply, and cooling capacity, not just the main motor. These supporting systems determine whether the pellet mills can maintain a stable production rate throughout the working schedule.
After compression, the hot pellets move to the cooling stage. Cooling is essential because pellets leaving the die are warm and contain added process moisture. They need sufficient air contact and residence time to release heat and moisture before screening, bulk storage, or dispatch. The higher combined discharge rate made cooler performance an important part of this upgrade. The plant reviewed its existing cooling arrangement and upgraded the cooler fans to improve airflow through the pellet bed.
The finished pellets are then screened to separate saleable product from loose fines. Fines can be returned to the process where the plant's operating procedure allows, while accepted pellets continue to bulk storage or load-out. This arrangement enabled the company to retain its existing material-handling and storage infrastructure while concentrating the main equipment investment on the pellet presses and the cooling adjustment required downstream.
Commissioning covered the mechanical and process interfaces between the new presses and the existing feed mill. The work included checking the foundation and machine alignment, confirming motor rotation, inspecting the feeder and conditioner, setting the roller-to-die clearance, checking cutter position, and verifying the steam and cooling connections. Operators were also trained to monitor feed flow, listen for abnormal machine noise, inspect the die and rollers, and follow the lubrication and cleaning schedule.
Because the mill produces several pellet sizes, die changes and product changeovers form part of normal operation. Before changing from one formula to another, the operator needs to clear residual mash from the feeding and conditioning sections and follow the plant's feed-safety procedure to avoid unintended carryover. The two-machine layout gives the production planner more flexibility: one press can remain assigned to a product while the other is prepared for a different die or formula, subject to the mill's batch schedule.
The operating team also monitors the cooler as closely as the pellet mills. A high-capacity press does not deliver a complete production improvement if the downstream cooler cannot handle the discharge. Fan performance, air distribution, bed depth, and residence time all affect the temperature and moisture of the finished pellets. The cooler fan adjustment was therefore an essential part of bringing the upgraded pelleting section into balance.
Following the equipment upgrade, the production team's assessment focused on the simpler machine arrangement and the maintenance requirements of the new presses. With two gear-driven pellet mills replacing four older belt-driven units, the maintenance team had fewer individual machines to inspect and service. Routine belt tensioning and belt replacement were no longer part of the maintenance schedule for the new presses.
The cooling section was the main downstream adjustment identified during operation. The increased pellet discharge required more cooling airflow than the existing fan arrangement could provide. After the cooler fans were upgraded, the plant could better coordinate pelletizing and cooling without treating the pellet mill as an isolated piece of equipment. This reinforced the importance of matching the capacity of the complete pelleting section.
The two SZLH508 feed pellet mills were shipped from Qingdao, China, to the Port of Barcelona. Barcelona provides dedicated container terminals and connections to road and rail freight networks, making it a practical entry point for machinery bound for Catalonia. After port handling and import procedures, the equipment was transported inland to the feed mill in the Lleida area.
RICHI supplied the machine documentation and installation information required for the project. The customer coordinated the receiving area and prepared the foundations and electrical connections before the machines were positioned. Final installation checks focused on safe access for maintenance, alignment with the existing conveyors, and the interfaces with the mixer discharge and downstream cooling equipment.
The completed upgrade gave the Lleida feed mill a two-press pelleting section built around SZLH508 gear-driven ring die machines. Four older presses were replaced by two higher-capacity units, while the plant retained its existing hammer mills, batch mixers, and bulk handling system. The project therefore concentrated capital and installation work on the stage that required modernization instead of rebuilding equipment that could continue serving the plant.
The new arrangement also provides a clearer maintenance structure. Operators can plan inspection, lubrication, die servicing, and product changeovers around two machines. The separate die sizes support the mill's broiler and layer feed range, while the cooling fan upgrade addresses the downstream airflow needed for the higher pellet discharge rate. Actual production remains dependent on feed formulation, die condition, conditioning settings, and the capacity of the complete process—not the pellet mill rating alone.
For a feed manufacturer evaluating a poultry pellet making machine for feed mill operation, this Spanish project illustrates the importance of checking the complete pelleting interface before choosing the press. Grinding consistency, mixer output, steam availability, die specification, cooling capacity, screening, and finished-feed handling all influence the performance of the installed machines. RICHI Machinery can assess these factors when planning a pellet mill replacement or capacity upgrade for an existing poultry feed plant.
Having the right mix of reliable, high-quality pellet machine and pelletizing systems and expert support is essential to your success. Watch how our end-to-end feed pellet plant solutions have helped our customers optimize their performance.
Our customized and future-proofed turnkey pellet plant solutions is designed with you at the core. From vision to reality and beyond, our team stays connected with yours. Giving you peace-of-mind with an expert at your side.
At RICHI, we go beyond project completion. With RICHI Servicee, we’re your dedicated partners in success. Count on us for expert guidance, minimal downtime, and optimized productivity. Choose RICHI for unmatched service and support.
Meet global product demands and quality standards with industry-leading pellet plant design, engineering, equipment, and construction services for pellet processors.

Your Partner Beyond Project Completion
2000+ cases
RICHI is the leading designer, manufacturer and builder of pellet plants in the world, completing over 2000 projects in 140 countries across 6 continents.
Read More
Increase plant productivity, profitability, and safety by integrating high quality equipment into your pellet production line. Over the years, RICHI has become China's top pellet equipment manufacturer. At the same time, RICHI has established valuable partnerships with the world's leading component and raw material manufacturers to bring you the best there is in technology, automation, and efficiency in pelleting plant machinery.
For nearly 30 years, RICHI has been providing best-in-class pellet plant equipment and services to clients across a variety of industries, sizes, and needs. We pride ourselves on the knowledge and skill that each team member possesses – from our technical sales team to our process design engineers. You can count on RICHI Machinery to take your operation to the next level of innovation, quality, and success.
Need help with your pellet manufacturing plant project? Contact us today.
ANIMAL FEED
BIOMASS
WOOD
ORGANIC FERTILIZER
AQUA FEED
CAT LITTER
MUNICIPAL WASTE RECYCLING
SPECIAL PELLET PRODUCTION
RICHI Machinery continues to deliver world class pellet mill equipment, pellet plant engineering and project solutions that add value to our customers in the animal feed, wood waste, agriculture waste, organic fertilizer, cat litter and special pellet products industries. Throughout the years, we RICHI Machinery have built strong brand, becoming industry-leading pellet machine manufacturer. We value integrity, promise quality, and prioritize your success.
Learn MoreWith our expert team, we precisely implement your process engineering requirements in pellet mill and pelletizing plant systems. No matter which industry you’re in – we understand your needs and deliver solutions that meet the highest standards.
At RICHI, quality comes first. Our pellet making machine and related pellet line equipment undergo rigorous quality controls to ensure they meet the highest standards. Rely on products that are durable, safe, and efficient.
With decades of experience in pellet machine and pellet production line production, we have earned a reputation as a trusted partner in various industries. Our expertise allows us to cover a wide range of applications.
Not only do we offer premium pelleting equipment, but we are also experts at designing, building, installing, and maintaining facilities from the ground up. Our expertise is within pellt plant process design, discovering the most efficient, productive, and profitable way to handle your materials in an end-to-end cycle.
○ RICHI MACHINERY
Keeping in touch with us is an effective way to solve all your problems. If you have any needs or questions, please leave your contact information, then RICHI technical consultants will send design, quotation, videos to your mailbox. You can also contact us directly via WhatsApp: +86 13838389622
Copyright©2015-2026 by HENAN RICHI MACHINERY CO., LTD. All rights reserved.