1.0–1.2 T/H Wood Shavings Horse Bedding Pellet Machine In Paraguay

A Slightly Unusual Customer Background

The buyer was not a traditional pellet producer. They were managing a medium-sized horse farm focused on breeding and training horses for regional competitions. Bedding quality mattered more than they initially realized.

Loose shavings were their standard bedding material. It worked, but there were consistent complaints:

• Dust levels were high, especially during dry months.
• Material consumption was higher than expected.
• Storage space was becoming an issue as operations expanded.

At the same time, the nearby woodworking shops were looking for a way to move their by-products without selling at extremely low prices. That overlap created an opportunity. Instead of continuing with loose material, the farm owner started looking into wood shavings pellet machine in Paraguay options.

Why They Chose a Single Pellet Machine

One thing became clear early on: they didn’t want to become a pellet factory. Their goal was simple—convert locally available wood shavings into a more efficient bedding product for internal use, with the possibility of selling surplus later.

They already had access to raw materials. They also had enough space to install a compact setup. What they didn’t have was experience with pelletizing. So instead of investing in a full wood pellet production line, they decided to start with a single wood shavings horse bedding pellet press in Paraguay.

There was also a financial reason. By starting small, they could test:

• Whether horses adapted well to pellet bedding
• Whether pellet durability met expectations
• Whether local demand existed beyond their own usage

Equipment Selection – A Balanced Choice

After going through their material characteristics and daily usage, we recommended the MZLH420 model. Here’s the configuration they purchased:

This capacity allowed them to produce enough bedding within a few hours of daily operation, rather than running continuously. The 6 mm pellet size worked well for horse bedding. Smaller pellets improved absorption, while still maintaining enough structure for handling.

Raw Material Details – Not Just Clean Shavings

Although the main material was wood shavings, the actual feedstock wasn’t perfectly uniform.

The mix included:

• Pine shavings (about 60%)
• Eucalyptus shavings (around 30%)
• Fine sawdust and sanding dust (roughly 10%)

That last portion—fine dust—needed attention. Too much fine material can affect pellet density and increase wear on the die.

We advised them to control the proportion rather than eliminate it completely. In real operations, full separation isn’t always practical. Moisture also varied depending on the source. Fresh shavings from cutting were slightly damp, while stored material was much drier. Blending helped stabilize the input.

How the Machine Was Set Up On-Site

The wood shavings pelletizer in Paraguay was installed in a simple steel-structure building next to the horse facility. Not a large plant—more like a functional workshop.

The layout followed a straightforward flow:

1. Raw materials delivered from nearby workshops
2. Temporary storage under cover
3. Feeding into the pellet machine
4. Natural cooling and basic screening
5. Packing into bags for barn use

They didn’t install a complex cooling system initially. Given the moderate output, natural air cooling was enough. One adjustment they made after a few weeks was improving material feeding. Wood shavings can sometimes bridge in the hopper, especially if particle size varies.

Logistics – Getting the Machine There

Like all similar projects, the equipment was shipped from Qingdao Port.

Since Paraguay is landlocked, the machine was delivered to Port of Buenos Aires in Argentina, which is commonly used for imports into Paraguay.

From there, the client handled inland transport.

Shipping time was about 35 days. Installation was guided remotely, with a few video calls to fine-tune alignment and initial operation.

What Changed After They Started Using Pellets

The shift from loose shavings to pelletized bedding brought several noticeable changes.

First, storage became more organized. Pellets are easier to stack and protect from moisture.

Second, usage dropped. They found that pellet bedding lasted longer in stalls compared to loose shavings.

Third, dust levels decreased significantly. This made a difference not just for the horses, but also for workers handling the material daily.

Interestingly, the horses adapted quickly. There was some hesitation at first, but within a short time, pellet bedding became the new standard.

Practical Notes From Their Operation

After a few months of running the wood shavings horse bedding pellet machine in Paraguay, the client shared some observations that are quite typical for this type of material:

• Consistent feeding is key. Shavings behave differently from sawdust.
• Moisture needs to stay within a narrow range for stable pellets.
• Mixed wood types can actually improve pellet structure slightly.

They also mentioned that pellet color varied depending on the material mix, but this didn’t affect performance.

Why They Went With RICHI

During discussions, the client compared several suppliers offering wood shavings pellet mill in Paraguay solutions.

Their decision came down to a few practical points:

• They appreciated that we didn’t push for a larger machine than necessary.
• Technical discussions were based on their actual materials, not standard assumptions.
• We provided guidance on setup, not just equipment specifications.

At one point, the client said:

“We needed something that fits what we have, not something that looks good on paper.”

That kind of feedback usually tells you the project is heading in the right direction.

One Machine, Multiple Possibilities

Even though the project was designed for internal bedding use, the wood shavings pellet press in Paraguay opened up other opportunities.

Local interest started to grow once people saw the product. Some nearby farms began asking about purchasing pellet bedding. That wasn’t part of the original plan, but it created an additional revenue stream. The current setup allows for future expansion without major changes.

Things Worth Thinking About Before Starting

For anyone considering a wood shavings horse bedding pellet machine in Paraguay, a few practical questions tend to come up during real discussions:

• Is your raw material supply stable and close enough to reduce transport cost?
• Do you plan to use pellets internally or sell them?
• How consistent is your material size and moisture?
• Do you have space for basic storage and handling?

These questions often shape the project more than the machine itself.

A Short Note From the Client

After running the system for a while, the client shared a simple comment:

“We didn’t expect the pellets to be this easy to handle. It made daily work lighter.”

That’s usually a good sign. When operators feel the difference, the project is doing what it’s supposed to do.

Closing Thoughts From the Engineering Side

The Wood Shavings Horse Bedding Pellet Machine In Paraguay project is not large in scale, but it shows how different industries can connect—wood processing on one side, livestock on the other.

Instead of treating shavings as waste, they turned it into a usable, consistent product.

No complicated system. Just one well-matched wood pellet mill in Paraguay, properly used.

If you’re dealing with similar materials and wondering whether pelletizing is worth trying, sometimes the best approach is to start small, test your material, and see how it performs in real conditions. That’s how most of these projects begin.