3T/H Furniture Factory Wood Waste Pellet Making Machine in Vietnam

Why a single pellet machine instead of a full line?

Interestingly, the client didn’t want a complete wood pellet production line at the beginning. That decision was quite deliberate.

They already had:

• A hammer mill for crushing larger wood scraps
• A drying system used occasionally for timber processing
• Basic conveying equipment

What they lacked was the core part—the pelletizing stage.

So instead of investing heavily all at once, they chose to purchase a single wood waste pellet mill in Vietnam to test the business model first.

From an engineering point of view, this approach actually makes sense. Start small, validate the market, then expand.

Raw materials: more than just sawdust

Although the project is labeled as a furniture factory wood waste pellet making machine in Vietnam, the actual raw material mix is slightly more complex.

About 70% of the feedstock is rubber wood sawdust. The rest includes:

• Fine sanding dust (very powdery, needs careful feeding)
• Small wood chips from trimming processes
• A small proportion of MDF edge scraps (strictly controlled to avoid excess glue content)

One challenge discussed early on was moisture variability. Fresh sawdust from cutting lines can be above 40% moisture, while sanding dust is often below 10%. Mixing became important before feeding into the wood pellet mill in Vietnam.

Equipment selection: why MZLH768?

For this biomass pellet project, the selected model is MZLH768, designed for a capacity range of 3.0–4.0 tons per hour.

Key configuration

• Main motor: 250 kW
• Feeder system:
  • Anti-arching feeder: 4 kW
  • Forced feeder: 1.5 kW
• Ring die inner diameter: 762 mm
• Final pellet size: 6–8 mm (client’s choice for industrial fuel market)

Some people might wonder why not choose a smaller model like MZLH678. The answer came from the client’s production rhythm. Their factory runs two shifts, and waste generation is quite concentrated during certain hours.

They needed a wood pellet press in Vietnam that could handle peak loads without choking. Also, the client is already thinking ahead. If the pellet business works well, they plan to expand to two shifts of pellet production. So choosing a slightly larger biomass pellet machine in Vietnam gives them flexibility.

What are these pellets used for?

The pellets produced by this furniture factory wood waste pellet machine in Vietnam are not for export at this stage.

They are mainly sold locally as industrial fuel, especially to:

• Brick kilns
• Small food processing plants
• Textile dyeing factories

Vietnam has a growing demand for biomass fuel, particularly in regions where coal usage is being restricted. Compared to loose sawdust, pellets are easier to transport, store, and burn more efficiently.

The client mentioned something practical during commissioning:“Before, we were paying to clean up waste. Now, trucks come to pick up pellets.”

Shipment: from Qingdao to Ho Chi Minh Port

Like most of our projects in Southeast Asia, this machine was shipped by sea from Qingdao Port. The destination port for this wood waste pellet machine in Vietnam was Ho Chi Minh Port, which is the closest major port to the client’s factory.

Transport itself wasn’t complicated, but extra attention was paid to packaging because Vietnam’s climate is humid. Electrical components were sealed carefully to avoid moisture damage during transit.

Installation: not as simple as placing a machine

Even though it’s a single wood pellet mill in Vietnam, installation still required some adjustments on-site.

The client’s existing workshop wasn’t originally designed for pellet production.

So adjustments were needed for:

• Limited vertical space
• Uneven raw material flow
• Dust control concerns

One small but important detail was that the sanding dust was too fine and tended to bridge inside the hopper. The anti-arching feeder played a crucial role here. Without it, feeding would have been inconsistent. These are the kinds of things that don’t show up in brochures, but they matter in real production.

How the machine actually performs

After a few weeks of trial runs, the furniture factory wood waste pellet making machine in Vietnam stabilized at around 3.2 tons per hour. Not bad, considering the variability of raw materials. The client initially worried about die wear due to mixed materials, especially MDF residues.

Strict control of input ratio helped keep the ring die lifespan within expected range. Energy consumption was another topic. The 250 kW motor sounds large, but when calculated per ton of output, it’s quite competitive.

Why they didn’t choose a cheaper machine

This came up during early discussions. There are cheaper wood pelletizers in Vietnam available locally.

The client had already visited a few suppliers and noticed differences in:

• Feeding system design
• Bearing quality
• Ring die processing precision

Their comment was quite straightforward:“If the machine stops often, cheap doesn’t mean cheap anymore.”

A few practical takeaways from this project

• A single wood pellet machine in Vietnam can be enough to start a new revenue stream
• Raw material consistency matters more than people expect
• Feeding system design is often underestimated
• Slightly larger capacity gives room for future growth

Client feedback after 3 months

We don’t usually hear back unless something goes wrong.

In this case, the client reached out again after about three months.

Their feedback was simple:

“Now we are thinking about adding one more unit.”

If you are in a similar situation

If you are dealing with wood waste—whether from a furniture factory, sawmill, or panel plant—the idea of installing a furniture factory wood waste pellet making machine in Vietnam or in your own country is worth looking into.

But before jumping in, it’s better to ask a few practical questions:

1. What exactly is in your raw material mix?
2. How stable is your moisture content?
3. Do you already have pre-processing equipment?
4. Who will buy your pellets?

These questions usually shape the entire project.

At RICHI Machinery, we don’t just supply a wood pellet press in Vietnam or elsewhere. Most of the time, we end up discussing these small but critical details with clients before anything is finalized. If you’re exploring something similar, it might be worth having that conversation early.