1-1.2T/H Dry Floating Fish Feed Extruder Machine in Belarus

Why This Belarusian Farmer Chose the DGP160-B Extruder

After comparing capacity, energy use, and practical daily output, he settled on the DGP160-B dry floating fish feed extruder machine from RICHI Machinery. He didn't want a massive system yet—just a strong, easy-to-run extruder to pair with his basic grinder and mixer.

Model details he chose:

• Model: DGP160-B dry floating fish feed extruder machine
• Capacity: 1–1.2 tons/hour
• Main Power: 90KW
• Feeding Power: 1.5KW
• Cutting Power: 3.0KW
• Screw Diameter: 155MM

This capacity of dry floating fish feed extruder machine in Belarus perfectly matches his target: producing feed twice per week for three small ponds totaling about 12–15 tons of live fish per year. He wanted a bit of spare capacity so he could test making feed for a neighbor's trout cages next season.

Local Raw Materials: Balancing Cost and Quality

Unlike tropical countries, Belarus doesn't have cheap fishmeal on its doorstep. But it does have solid grain farming, oilseeds, and meat processing byproducts. This farmer designed his new feed formula to use local ingredients as much as possible, blending cost savings with the nutrition carp and trout need.

A typical batch for the dry floating fish feed extruder machine in Belarus looks like this:

• 35% sunflower meal (locally pressed, affordable)
• 30% wheat flour (from nearby mills)
• 20% soybean meal (imported but easy to source)
• 10% fishmeal (small share, sourced from Baltic fish processing plants)
• 5% vitamin-mineral premix and binders

By balancing high-protein fishmeal with cheaper local sunflower meal and wheat, he keeps protein levels around 32–35%—ideal for his mixed carp and trout operation.

What Changed When He Added His Own Dry Floating Fish Feed Machine

Before he bought the DGP160-B dry floating fish feed extruder machine in Belarus, the farm spent about 40% of its yearly operating budget on bagged pellets. It was the biggest single expense after electricity for aerators in winter.

Now, with his own extruder, the picture is very different. He buys raw materials directly from local farmers and mills—often paying better prices than big feed companies offer for the same grain. He can store wheat and sunflower meal in his own sheds, then grind and mix batches as needed.

Running the dry floating fish feed extruder machine in Belarus means:

• He can adjust pellet size (from 2mm to 6mm) for fingerlings or big carp.
• He can control moisture, so pellets float well—essential for cold-water feeding.
• He saves around 25–30% on feed costs compared to his last bulk order from a foreign supplier.
• He trains his small team to maintain the extruder and check pellet floatability daily.

Small Steps, Big Freedom

A lot of people assume you need an entire factory to produce quality fish feed. But this farmer proves it's not true—one well-chosen dry floating fish feed extruder machine in Belarus and a simple feed mixer are enough to shift power back to the farmer.

Better yet, he’s no longer locked into one feed recipe. If sunflower meal prices spike, he can test more soybean or canola meal. If wheat becomes cheaper after harvest, he tweaks the ratio. Flexibility saves him money—and keeps fish healthy.

Solving Real Problems: Cold Climate and Clean Ponds

Floating feed is extra important in Belarus. Fish need to be fed during short warm months. If pellets sink too soon, farmers lose feed and cause water pollution, which is expensive to fix and bad for fish health.

The DGP160-B dry floating fish feed extruder machine in Belarus gives him tight control over pellet expansion and float time. With proper pre-conditioning and careful cutting, his feed stays on the surface longer—so fish can eat everything and less waste sinks to pond bottoms.

The Future: Not Just Carp and Trout

Already, this farmer is thinking ahead. There's growing interest in sturgeon farming in Belarus, driven by rising demand for local caviar and smoked fish. Sturgeon need high-protein feed with slightly different pellet specs. With the DGP160-B dry floating fish feed machine, he's confident he can produce test batches for sturgeon fingerlings next season—without buying a second machine.

He's also begun talking to other small pond owners in his region about producing small feed lots for them. He might never run a huge feed mill, but selling 1–2 tons per month to neighbors could easily cover his machine maintenance and electricity.

Why He Chose RICHI and Not Another Brand

This farmer didn't just want any cheap extruder. He wanted real backup. He liked that RICHI's local team in Eastern Europe could help with:

• Feed formula advice using Belarus' real raw material market.
• Step-by-step videos and on-call troubleshooting.
• Genuine spare parts shipped quickly from a regional hub.

He knows if anything goes wrong, he's not alone. For a small family farm with no full-time mechanic, this support is worth more than a few dollars saved on a low-quality extruder.

The Right Machine, the Right Partner

A dry floating fish feed extruder is not just another piece of steel. It's a tool that makes or breaks a farm's profits. By picking the right size—like the DGP160-B dry floating fish feed extruder machine in Belarus—and learning to run it well, this young Belarusian farmer has secured his family's fish farm for years to come.

He also knows he can grow when the time is right. If demand spikes, he can upgrade later or run more shifts. But for now, one good machine and a clear plan is all he needs.

What Other Farmers Can Learn

Whether you run carp ponds in Belarus, trout raceways in Poland, or tilapia cages in Eastern Europe—controlling feed is the key to stable profits. You don't have to build a massive dry floating fish feed machine plant overnight. Many family farms are starting exactly like this—one grinder, one mixer, one dry type fish feed extruder machine.

And with RICHI's lineup—DGP80-B, DGP90-B, DGP120-B, DGP135-B, DGP160-B, DGP200-B—you can pick the size that fits, with the confidence that you're not alone if you need help.

Ready to Take Control of Your Feed Costs?

This young man near Vitebsk is just one of many proving that small steps add up to big changes. With a dry floating fish feed extruder machine in Belarus, you can make better pellets, save money, feed your fish better—and keep more profit in your pocket.

So if you've been thinking about how to cut costs and take control, maybe it's time to talk to RICHI. They don't just sell you a machine—they help you build a future.

Contact RICHI Machinery today. Ask about which dry floating fish feed extruder fits your farm best—then get ready to feed smarter, grow stronger, and trust your own hands instead of the next truck at the border.