How does counter flow cooler work? Richi counter flow cooler is a new type of cooler popular in the world. It uses the principle of counter current cooling to cool high temperature and high humidity pellets, that is, the ambient cold air passes vertically through the layer, first with the cold phase. The hot air heated in contact with the hot material and the direction of the wind flow is opposite to the direction of the flow. Counter flow cooler mainly composed of rotary closed air feeder, air outlet top cover, rhomboid bulk material, cooling box body, upper and lower level positioner, deceleration brake motor, eccentric transmission spool-type discharge mechanism, fixed the frame adjusting device, the collecting hopper, the frame, and then composed of the same suction system.
SKLN Series Counter Flow Cooler mainly used for the cooling of feed pellets in the pelletization section of large and medium-sized feed mills. The pellet feed from the feed pellet machine up to 80-90℃and the moisture content of 17-18% cooled to a temperature slightly higher than room temperature. Up to 12% to 13% for easy transportation and storage.
The cooling system is an extremely important part of the feed production process, which directly affects the cooling dehumidification effect of the feed pellets and the quality indicators of the products, such as moisture and chalking rate.
Counter flow cooler is the most advanced pellet feed cooling technology in the world. It is a new generation of cooling equipment developed for the cooling of high-temperature pellet feed after pelletization. Adopting the principle of counter flow cooling, the pellets fully cooled, and the machine adopts a unique sliding valve mechanism to discharge materials, and the operation and discharge are smooth.
The machine uses the principle of counter flow cooling to cool the high-temperature and high-humidity pellets, avoiding the sudden contact between the cold air and the hot material, thus preventing the surface cracking of the pellets. At the same time, the cooling effect is remarkable due to the use of a gas trap and a large inlet area. It also adopts a slide valve type or pendulum type discharge mechanism, which is stable, reliable and has few residuals.
SKLN series counter flow cooler adopting a reasonable cooling principle and introducing international advanced technology. It consists of the feeding section, the housing bracket, and the discharge door mechanism. The machine has a large body capacity, and it only needs to change the position of the material positioner to applicable different production (within the specified range). The discharge mechanism is pneumatic or electric and has no vibration. The cooling chamber of the machine adopts a cone mesh plate. According to different models, there are 6-8 cooling zones, which can distribute the materials in each cooling zone. Therefore, a large amount of cold air flows in each cooling zone, and the materials cooled. The speed is fast and the effect is good, thus ensuring the final high quality of the cooling product. The model has a reasonable layout, simple structure, convenient assembly and disassembly, low energy consumption, a high degree of automation, and high production efficiency. It is an ideal feed pellet cooling device.
1. Adopting the principle of counter flow cooling, the pellets cooled sufficiently and evenly.
2. Adopt a unique slide valve type discharge mechanism. The operation and discharge are smooth.
3. Simple maintenance and convenient installation arrangement.
4. The temperature of the pellets after cooling is not higher than room temperature 3-5 ° C.
5. Easy to adjust, a high degree of automation, can suitable for the cooling of various pellets.
Choosing a suitable feed cooling machine and using it properly will significantly improve the quality of feed. It will soon reflect a benign effect in the production process. If you can further master the technology of the cooling, you can also reduce the cost of the materials, thereby increasing the profits.
Which is discharged from the feed pellet machine and is uniformly stacked in a cooling box through a rotary conical bulker. And the cold air is slide-type from the lower side of the cooling box. The bottom of the discharge mechanism and the upper part of the collecting hopper enter the cooler in all directions. Pass through the material layer to exchange heat with the moist heat particles, and then suck out through the suction system. So that the pellets can cool.
The above is the article for you: How does counter flow cooler work?. If you are interested in our products or project solutions, please contact us. We will give you the best product quality and the best price. Email: firstname.lastname@example.org
With the sales contract, the order tracking clerk checks the models and quantities of each machine and spare parts.
Quality Test Before Delivery
Upon completion of the manufacturing of equipment, tthe quality inspector strictly checks quality of every machine with the checklist.
Check Items When Packing
Before packaging and shipment, the order tracking clerk checks the packaged items again with the packing list to avoid loss of items.
Sign the contract
Adopting international common standards for accurate design of product packaging, prevent product damage rate and the effective use of transport tools, which ensure the perfect delivery of products.
Get the minimum offer free of charge, please fill in the following information to tell us (confidential information, not open to the public)